Electrician in Rotherham

Services available in Rotherham

• Full & Partial Rewires

  A full rewire replaces every circuit, socket and switch in your home with a modern, safely certified system. It's essential for properties with old fabric-covered or aluminium wiring, or anyone buying a period house in Sheffield without recent electrical history. We also carry out partial rewires, upgrading a single room or floor without disturbing the rest of the property. Every rewire is planned around your home, not a standard template. We walk the property with you first, agree exactly what's being replaced and where new sockets or lighting points will go, then give you a fixed price before any work starts. On completion you receive a full Electrical Installation Certificate, so you have proof the work meets current wiring regulations for insurance, mortgage or resale purposes.

  Old wiring doesn’t always announce itself. Warm sockets, flickering lights, or a fuse box that still uses rewireable fuses instead of RCBOs are all signs it’s worth having your circuits inspected before they fail. We work throughout Sheffield, Rotherham, Barnsley, Doncaster, Chesterfield and Worksop on both occupied homes and empty properties being renovated ahead of sale or letting.

  We make dust and disruption as manageable as possible: chasing walls neatly, patching where we cut, and working room by room if you’re living in the property throughout. Every circuit is tested and certified before we sign off, and we’ll talk you through what the certificate covers.

  More about Full & Partial Rewires

• Consumer Unit Upgrades

  If your fuse box still has a wooden back, rewireable fuses, or no RCD protection at all, it's overdue an upgrade. We replace old consumer units with modern, metal-cased boards fitted with RCBOs on every circuit, so a single fault trips only that circuit, not the whole house. This is one of the most common jobs we do across Sheffield and South Yorkshire, often prompted by a home insurance renewal, a mortgage survey, or simply a board that's tripping more than it used to. Most upgrades are completed in a single day with minimal disruption, and we test every existing circuit as part of the job so any pre-existing faults are identified and explained before we close up the board. You'll get a Minor Electrical Installation Works Certificate confirming the new board meets current wiring regulations.

  A consumer unit upgrade is one of the highest-value jobs you can have done on an older property. It doesn’t just modernise the board: it protects everything downstream of it. We commonly find this work prompted by an EICR that’s flagged the old board as a C2 or C1 defect.

  We’ll agree the power-down window with you in advance (usually a few hours), test and label every circuit as we go, and leave you with a clear certificate and a properly labelled board so you know exactly what each switch controls.

  More about Consumer Unit Upgrades

• EV Charger Installation

  We supply and install home EV chargers from leading manufacturers, fully compliant with the latest IET wiring regulations for electric vehicle charging points. Installation includes a dedicated circuit from your consumer unit, correct earthing arrangements for your property type, and load management set-up where needed so charging doesn't overload your supply. We handle OZEV grant paperwork where you're eligible, and can advise on tethered versus untethered units, charging speed, and the best wall or post-mounted position for your driveway or garage. Most installations across Sheffield, Rotherham and the surrounding area are completed in half a day. From £850 fitted, depending on cable run length and whether any consumer unit upgrade is needed first.

  Charging speed and reliability depend on more than just the charger you buy. The circuit feeding it matters just as much. We size the cable and protection correctly for your property’s supply, and where an older consumer unit isn’t suitable for a high-load EV circuit, we’ll flag that during the survey rather than after installation has started.

  We install units suited to both older properties and new-build homes, including flats with allocated parking where cable routing needs more planning.

  More about EV Charger Installation

• Electrical Safety Certificates (EICR)

  An Electrical Installation Condition Report (EICR) is a full inspection of your property's fixed wiring, sockets, switches and consumer unit, checked against current safety standards and classified for any defects found. Landlords in Sheffield and South Yorkshire are legally required to have one carried out every five years, and many mortgage lenders and insurers now ask for a recent report too. We inspect the full installation, test every circuit, and issue a clear pass/fail report with any defects graded by severity, so you know what, if anything, needs fixing and how urgent it is. Reports are usually turned around within 48 hours of the inspection. From £150 for a typical 3-bedroom property.

  Most EICRs come back with at least a minor observation. That’s normal and doesn’t mean the property is unsafe. What matters is understanding the difference between a C1 (danger present, needs immediate attention), a C2 (potentially dangerous, needs remedying), and a C3 (improvement recommended but not required).

  We talk you through the findings in plain English rather than just handing over a form, and can quote for any remedial work needed on the spot if you’d like it done at the same time.

  More about Electrical Safety Certificates (EICR)

• Fault Finding & Emergency Repairs

  Power gone completely, a circuit that keeps tripping, a burning smell from a socket. These are the calls we prioritise. We offer 24/7 emergency callouts across Sheffield, Rotherham, Barnsley, Doncaster, Chesterfield and Worksop, with a fully equipped van and fault-finding equipment to trace the problem quickly rather than replacing parts by guesswork. Most faults are diagnosed and fixed on the first visit; where a fault is buried in the fabric of the building, we'll explain what we've found and the options for a permanent fix. There's no call-out charge, and you'll always get a price before any repair work goes ahead, even out of hours.

  Intermittent faults are usually the hardest to trace, because the symptom isn’t always present when we arrive. We use proper test equipment rather than swapping parts on a hunch, checking insulation resistance, earth continuity and polarity across the affected circuit to find the actual cause.

  If the fault turns out to be a symptom of an ageing consumer unit or old wiring, we’ll tell you honestly rather than just patching the immediate problem.

  More about Fault Finding & Emergency Repairs

• Lighting Installation

  From simple pendant swaps to full LED downlight schemes, we handle lighting installation and rewiring for kitchens, extensions, bathrooms and gardens across Sheffield and South Yorkshire. This covers new circuits for extensions and loft conversions, converting old bathroom lighting to safely zoned IP-rated fittings, outdoor and security lighting on PIR sensors, and dimmer or smart lighting control setup. We can work from your own fittings or supply and fit LED downlights, pendants and outdoor fixtures directly. All bathroom and outdoor lighting work is completed to the correct IP rating for the zone it's installed in, and every new circuit is tested and certified on completion.

  Lighting is one of the easiest ways to change how a room feels, but it’s also an area where the wrong fitting in the wrong place, particularly in bathrooms, creates a genuine safety issue. We’ll advise on IP ratings and zoning as part of the quote, not as an afterthought.

  Whether it’s a single extra circuit for a kitchen island or a full scheme across an extension, we quote a fixed price per circuit so there are no surprises once chasing and first-fix work is underway.

  More about Lighting Installation